• page_banner

About the Instrument Transformer

(epoxy resin clamping machine made)

Instrument transformers are used to step-down current or voltage to measurable values. They provide standardized, usable levels of current or voltage in a variety of power monitoring and measurement applications.

When you are prepare to order the Transformers,here are some factors listed for you to make the choice and decision:

1.Input & Output Voltage, Frequency, Current.

To select the proper transformer, determine the input and output voltages, frequency and current. The faster the voltage changes, the higher the frequency. The higher the current, the more heat is produced. Other equations apply.

2.Safety Agency Certification Requirements.

UL, CSA, CE requirements vary from one application to another. For example, medical products have very different requirements than office products. You should determine which specific agency standard you are trying to meet.

3.Mounting Configuration needs to be decided.

Usual choices are PC mount or Chassis mount. However, our application engineers can offer a number of other options to meet your special requirements.

4.Available area is sometimes very limited.

If this is true in your configuration be ready to specify Height, Length, & Width limits. Knowing size limitations up front will help expedite the proper transformer selection process.

5.Casting technology

If you require Current transformer or voltage transformer casting by APG clamping machine or vacuum casting tank..

 


Post time: Jan-05-2022