• page_banner

Metal stamping parts application

Short Description:

Metal stamping parts Application:Used on epoxy resin components,such as epoxy resin CT,PT ,bushing,spout.etc


Product Detail

Product Tags

Metal stamping parts Application

Used on epoxy resin components,such as epoxy resin CT,PT ,bushing,spout.etc

Metal stamping parts series photo

Metal stamping parts series photo (1)
Metal stamping parts series photo (4)
Metal stamping parts series photo (3)
Metal stamping parts series photo (2)

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Insulation rod application

      Insulation rod application

      Insulation operation bar Application The insulating tie rod includes an insulating rod and a joint arranged at the end of the insulating rod, a screw device is also arranged between the insulating rod and the joint, and the insulating rod is connected with the joint through the screw device. The stress area of the entire insulating rod is transferred to the spiral device, which greatly reduces the load of the insulating rod and the damage to its own material, improve...

    • Pressure equalizing ring application

      Pressure equalizing ring application

      Application As we all know, there must be a tiny air gap between the insulating parts and the mounting plate in the medium voltage switchgear, and the field strength of this small air gap will far exceed the breakdown field strength of the air, and a discharge phenomenon will occur in the small air gap. The charged particles overflow from the air gap and distort the original electric field after reaching the interface, thereby reducing the flashover voltage and reduc...

    • Nylon mesh application

      Nylon mesh application

      Application As we all know, there must be a tiny air gap between the insulating parts and the mounting plate in the medium voltage switchgear, and the field strength of this small air gap will far exceed the breakdown field strength of the air, and a discharge phenomenon will occur in the small air gap. The charged particles overflow from the air gap and distort the original electric field after reaching the interface, thereby reducing the flashover voltage and reduc...