• page_banner

Indoor High Voltage SF6 Gas Load Break Switch (LBS)

Short Description:

We not only supply APG machine and molds,but also cast epoxy resin products for clients.


Product Detail

Product Tags

Indoor High Voltage SF6 Gas Load Break Switch (LBS)

Indoor-High-Voltage-SF6-Gas-Load-Break-Switch-LBS-removebg-preview

Casting by APG machine:

Product Description
indoor high-voltage SF6 load break switch, It is widely used in 11~24kV electric power distribution system , adopted with SF6 gas as an arc-extinguishing and insulation medium, including the three contactors for switching-on and switching-off and to-ground, and is characteristic in its small volume, its convenient installation and operation and its the great adaptability with surroundings.Indoor high-voltage SF6 load break switch and SF6 load break switch plus fuse combination can function to protect and control the electric equipments for power supply and transformer substations especially being suitable for ring net cabinet, cable branch cabinet and distribution switching substation. indoor high-voltage SF6 load switch and SF6 load break switch plus fuse combination are complied with the standards of IEC60265-1-1998, IEC60420 etc.

Service Environment

a)Air temperature
Maximum temperature: +40℃; Minimum temperature:-35℃
b)Humidity
Monthly average humidity 95%; Daily average humidity 90% .
c)Altitude above sea level
Maximum installation altitude: 2500m
d)Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e)No frequent violent shake

Indoor High Voltage SF6 Gas Load Break Switch (LBS)SINGLEIMG (2) Indoor-High-Voltage-SF6-Gas-Load-Break-Switch-LBSSINGLEIMG-1-removebg-preview

Application:

10kv indoor high voltage load switch FLN36-12/630A hexafluorosulfur load switch SF6 load switch

The load switch is a kind of switching device between the circuit breaker and the isolating switch. It has a simple arc extinguishing device that can cut off the rated load current and a certain overload current.

Product Details:

The load switch is mainly used to break and close the load current. The load switch can also be used in conjunction with a high-voltage fuse instead of a circuit breaker. Because the load switch is convenient and reasonable to use, the load switch is used in the 10kV distribution network system. Reasonable selection of load switches in the design is of great significance to ensure the safe and reliable operation of the power grid.

SINLIEM4FG5


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • CURRENT TRANSFORMER for indoor and outdoor application

      CURRENT TRANSFORMER for indoor and outdoor appl...

      CURRENT TRANSFORMER for indoor and outdoor application Voltage range 12-36KV Economic Efficiency for its increase of withstand short time thermal currents over same dimension No Partial Discharge Excellent electric Characteristics and Mechanical Strength Current transformer cast by advanced technology- APG technology, Easy to handle in case of changing to the other different Current transformers / Potential Transformers are a natural extension to our range of products to cater to the Switchg...

    • Wall bushing

      Wall bushing

      Wall bushing Plug-in bushings manufactured from epoxy resin are used at the HV Side of the Indoor Transformer, with right cable connection. We produces Plug in Bushings for oil immersed distribution transformer, in compliance with EN 50180 / IEC60137 interface A & Cup to 36 kV, 630A. Our products are used successfully in the fields of power distribution. ...

    • Epoxy resin Post Insulators

      Epoxy resin Post Insulators

      We manufacture a wide range of insulators by epoxy resin, under the electro technical regulation for low voltage 2413/1973. Epoxy resin insulators Cast by APG machine process: Application: Function use: General production enterprises are manufactured according to the S312 and 02S404 standard atlas developed and designed by the Institute of Building Research. The wall where the flexible wall-through waterproof casing penetrates the wall should be replaced with a concrete wall if it is no...

    • Potential TRANSFORMER for indoor and outdoor application

      Potential TRANSFORMER for indoor and outdoor ap...

      Potential TRANSFORMER for indoor and outdoor application Voltage range 12-36KV Economic Efficiency for its increase of withstand short time thermal currents over same dimension No Partial Discharge Excellent electric Characteristics and Mechanical Strength Current transformer cast by advanced technology- APG technology, Easy to handle in case of changing to the other different Cast by APG machine process 2 cavities: Application: The APG manufacturing process of epoxy resin casting cu...

    • Embedded pole

      Embedded pole

      Embedded pole Cast by apg machine process: VS1 indoor vacuum circuit breaker(VCB) manufactured has complete specifications,with rated current up to3150A, rated short-circuit breaking current ip to 50kA. It the modular spring operating mechanism, which has the characteristics of convenient maintenance, rapid replacement of parts and reliable performance. Through advanced APG process,both the vacuum interrupter and the primary circuit adopt the solid sealed poles cast in the insulating cylin...